Repair kit
Repair kit — beach repairs
A small hole in the kite or a peeled valve does not have to end the session. With the right repair kit you make an emergency fix in minutes and get the kite safely off the water.
What is in the kit and how to use it
A typical kit contains self-adhesive canopy patches, material for Dacron sections, glue and instructions. The surface must be clean, dry and salt-free — a patch on a wet, salty surface will not hold.
When to see a repair shop
- A tear along a seam or on a loaded edge.
- A damaged bladder or valve.
- A rip longer than a few centimetres.
In those cases the emergency patch is only there to get the kite ashore — for a permanent repair, come to us.
Do not forget
A repair kit belongs in every bag, together with a pump and a spare leash.
Tip: if you are not sure what you need, write to us — we advise based on your skill, weight and the conditions you ride in.
Kite Repair Kit
With our new DIY repair kit you can fix almost every known kite problem – from ripstop and dacron fabric damage to bladder and valve repairs.
More about the product →
HARLEM FORCE — bridles
Replacement bridle set for the Harlem Force kite, sizes 5–12 m².
More about the product →
HARLEM THRIVE — bridles
Replacement bridle set for the Harlem Thrive and Thrive V2, sizes 5–17 m².
More about the product →
HARLEM PEAK — bridles
Replacement bridle set for the Harlem Peak kite, sizes 6–12 m².
More about the product →
HARLEM FORCE — bladders
Replacement bladders for the Harlem Force kite — leading edge and struts, sizes 5–12 m².
More about the product →
HARLEM THRIVE — bladders
Replacement bladders for the Harlem Thrive and Thrive V2 — leading edge and struts, sizes 5–17 m².
More about the product →
HARLEM PEAK — bladders
Replacement bladders for the Harlem Peak kite — leading edge and struts, sizes 6–12 m².
More about the product →
HARLEM BRAINCHILD INFLATE CAP
A replacement Inflate valve cap for Brainchild kites.
More about the product →
HARLEM BRAINCHILD ONE PUMP VALVE 90°
A 90° angled One Pump valve for Brainchild kites.
More about the product →
HARLEM BRAINCHILD ONE PUMP VALVE 0°
A straight (0°) One Pump valve for Brainchild kites.
More about the product →
HARLEM BRAINCHILD INFLATE REPAIR PATCH
A repair patch for the Inflate valve on Brainchild kites.
More about the product →
HARLEM DEFLATE VALVE
A replacement deflate valve.
More about the product →
HARLEM INFLATE VALVE
A replacement inflate valve — Go, Wave, Strike, Light and Ace models.
More about the product →
HARLEM BATTEN CARBON
A replacement carbon trailing-edge batten — Peak, Thrive, Force and Pace models.
More about the product →
HARLEM BATTEN
A replacement trailing-edge batten — Go, Wave, Strike, Light and Ace models.
More about the product →
HARLEM TUBE CLAMP
A replacement clamp for the One Pump tube.
More about the product →
HARLEM ONE PUMP TUBE
A replacement One Pump tube connecting the leading edge to the struts.
More about the product →Need help choosing — Repair kit?
Write to us via the contact page: we advise based on your skill, weight and conditions you ride in. Also see Accessories or try the gear first through kite equipment rental.
With us a purchase is more than a product — setup help, advice and after-sales service are included.
